Sharjah Yellow Pages Online
Home » Products »  Air Cooler Cleaner Sea Water Side ( Scale Remover

Air Cooler Cleaner Sea Water Side ( Scale Remover

Add Review
Price : On Request

Sold by

Dirt in tubes of seawater side

White scales attached on the seawater side of air coolers of many vessels. We found that in most cases, the main component of the scales is calcium carbonate and there is also a small amount of calcium sulfate. Therefore in most cases, if you dissolve the calcium carbonate the scales will be removed.

However, if the amount of scales is large enough to block the tube, the cylindrical scale will usually have calcium carbonate on the outside (the side that is in contact with tube) and calcium sulfate in the center (part that seawater passes through). Calcium sulfate is easier to be formed when the temperature goes higher.

When the amount of scales increases, the contact area of scale and cleaner is very small and a longer time of dissolution is required. Calcium sulfate cannot be dissolved by an acid cleaner.

RXSOL-54-1048-020 is a powerful dissolving agent of calcium carbonate. Therefore, it is better to use RXSOL-54-1048-020 to do circulating cleaning at an early stage before the scales build up and block the tube, or regular cleaning is recommended as well. It is impossible to do a circulating cleaning when the tube is completely blocked.

while Dirt attached on air-side fins of air coolers are a mix of carbonaceous particles such as soot and oil mist of unburned fuel components can be clean by RXSOL-16-0009-025. ( www.rxmarine.com/air-cooler-cleaner-25-ltr )Carbonaceous particles can be removed by alkaline cleaners and oil mist can be removed by oil based cleaners. However, it is very difficult to remove the mix of these substances. If you use an alkaline cleaner, oil will repel the water based alkaline cleaner; if you use oil based cleaner, carbonaceous particles will get in the way and stop oil from being removed..

Also Suitable for Cleaning of BOILER and Cooling Water deposition...

Scales are very damaging to the boiler because they interfere with the heat transfer and can lead to overheating and eventually, boiler rupture , To increas usable life of cleaned equipment , it is safe and effective way to remove scale deposits from all types of water-cooled and water-heated equipment. This descaler specifically formulated and developed to rapidly clean mineral scale from passages in water-cooled or heated equipment. It improves Plant Efficiency, Lowers Cost, Conserves Energy, Decreases Down-Time.Chemically react with and decompose Calcium, Magnesium deposited Salts. Suitable for pipeline, boiler, HVAC, Heat Exhanger, Condenser, Evapourator, Chiller, Compressor and etc. Specifically formulated to remove rust and water scale build up from boiler evaporators, heat exchangers, cooling systems, pipeline collection system etc. Highly effective on heating. Safe and easy handling and storage . Fast and effctive scale remover .- Non-combustible- Smoke from fires is irritating- Not flammable. In case of fire use extinguishing media appropriate to surrounding conditions- Prevent run off water from entering drains if possible- Non-poisonous ::: It does not contain toxic cresols or other tar oils that Require SARA Title III, Section 313 spill loss or disposal.Non-polluting, Non-corrosive.Uniqueness of RXSOL-54-1048-020 ::: --- RXSOL-54-1048-020 Descaler has the ability to dissolve approximately 1.5kg of calcium carbonate scale per gallon in concentrated form. It does not need to be heated up during cleaning. The uniqueness of this Descaler allows you to clean some equipment while still in operation utilizing a minimum of your own personnel.

  • Product Details
  • Brand :
  • Place of Origin : Not Given
  • FOB Price : On Request
  • Minimum Order Quantity : 210Ltr
  • Supply Ability :
  • Packaging & Delivery
  • Packaging Detail : Packaging Details: Packing 5, 10, 25 , 210 9)Organophillic Clay: Organophilic bentonite and hectorite, "bentones," are used in oil muds to build rheology for cuttings lifting and solids suspension. They also contribute to low-permeability filter cake. Organophilic attapulgite and sepiolite are used in oil muds strictly to build gel structure, which may not be long lasting due to shear degradation as the mud is pumped through the bit.part Code: RXSOL-81-8130-025.10) Poly Anionic Cellulose : Polyanionic cellulose (Poly anionic cellulose) referred to as PAC, is from natural cellulose by chemical modification and the obtained water soluble derivatives of cellulose ethers, is an important water-soluble cellulose ether, white or slightly yellow powder, non-toxic, tasteless, it can be dissolved in water, have good heat stability, and salt-tolerance, anti-bacterial and strong. The product slurry prepared with a good drop of fluid loss, and suppression, of a hig
  • Delivery Detail :
  • Minimum Order Quantity: 5
  • Port of Dispatch: India And Middle East
  • Delivery Time: 1
Not Given
Other Products