Clean first the surfaces to be sealed. All visible contamination must be removed thoroughly, see that the border areas are also cleaned. The procedure must be done in a dry place without direct sunlight. The temperature should be between 15°C and 25°C. pre-cleaner - Shake the bottle and cut the top of the cap. Apply the pre-cleaner with a paper tissue on the surface to be sealed and polish well after drying. The pre-cleaner creates a film on the glass. Repeat the cleaning procedure, also partially if necessary, until this film does not tear or crack any longer. Afterwards let the polished surface dry for 5 minutes and polish again until all residues are removed. Residues on paint or rubber parts can be easily removed with water. Attention! Don’t touch the cleaned surface with the hands. mixing - Fill Component 2 with the Component 1 in the mix bottle, close the bottle well and shake for 2 minutes. Attention! The sealant must be used after mixing within
